BASIC COMPONENTS OF THE SYSTEM:
| The foundation for laying can be - brick, gas beton or concrete. |
| 1. Adhesive for fixing thermal insulation panels "Superstirofix" - cement adhesive for fixing EPS and XPS thermal insulation panels. Package: 25 kg; Form of delivery: 40 p õ 25 kg = 1000 kg on europallet; Norm of expenditure: 4-5 kg/sq m; Colour: grey; Ingredients: cement, quartz sand, mineral aggregates, polypropylene fibers, additives. |
2. Thermal insulation panel "BAUMASTER - EPS-F" - EPS with density: 15-25 kg/m3 Measurement: L = 1000, 1200 mm, B = 500 mm, thickness = 20, 30, 40, 50, 60, 80, 100 mm. |  |
 | 3. Nails for fixing of the thermal insulation panels - depending on the thermal insulation material and its density are used different in lenght and diameter nails: - The thermal insulation panels are fixed with a plastic nail. - The mineral wadding thermal insulation panels can be fixed with plastic and metal nail. |
5, 7. Facade ground coat for thermal insulation panels "Superplast" 5. Ground coat - 1 layer; 7. Ground coat - 2 layer White cement ground coat for ground coating of EPS and XPS thermal insulation panels. Package: 25, 5 kg; Form of delivery: 40 p õ 25 kg = 1000 kg on europallet. Maximum layer thickness: 5 mm; Norm of expenditure: 3-4 kg/m2; Colour: white; Ingredients: cement, quartz sand, mineral aggregates, polypropylene fibers, additives. |  |
 | 6. Fiberglass mesh "BAUMASTER" - min 145 gr/m2 - FIBERGLASS ALKALI RESISTANT - alkali-resistant reinforcement fiberglass mesh, Measurement of the squares: 5 mm õ 5 mm; Measurement of the net: 1 m õ 50 m |
| 8. Primer for walls "BAUMASTER" - consistent with the colour of the pargeting - deeply infiltrating strengthening primer for preparation of walls before laying subsequent coatings. Packages: 20, 15, 10, 5, 1 kg; Form of delivery: a package; Norm of expenditure: 125 gr/m2; Colour: choice from a catalogue; Time for drying:up to 2 h after laying; Ingredients: homogenåous mixture of ecologically clean polymer dispersion, aggregates and other additives. Does not contain substances harmful for the health and the environment, odorless. |  |
 | 9. BAUMASTER - dry and emulsion plaster. They are: structured, dispersion, noble, polymer, silicon and silicate. |
The system includes also à protective set-square with mesh, waterdrip profile, initial profile.
THE PRODUCTS ARE MANIFACTURED WITH HIGH QUALITY POLYMER ECOLOGICALLY CLEAN COMPONENTS BY LEADING AMERICAN AND EUROPEAN CHEMICAL CONCERNS.
BASIC ADVANTAGES OF THE SYSTEM:
• Reduces the expences for heating and cooling with 30%,
• Creates normal microclimate in all seasons,
• Creates higher living comfort,
• Allows for aesthetic mounting of the facade with ulimited possibilities,
• Ensures longer life of the building.