Solutions

BAUMASTER - PRIMER FOR FLOORS AND WALLS:

• Function - for consolidation of the foundation and creating of the necessary cohesion before laying floor putties or water insulation mixtures. Serves for cleaning the dust out of the foundation.

• Instructions for working - the foundation is primed with solution of primer:water - 1:3. With very porous foundations, a second priming is possible.

• Advantages - creates a very good contact between the different layers.

• Ingredients - homogenous mixture of ecologically clean polymer dispersion, aggregates and other additives. Does not contain substances harmful for the health or the environment, odorless.

• Packages - 20, 5, 1 kg in plastic pail or plastic tube.

• Technical parameters - time for drying up to 2 hours after laying; diluent - water; norm of expenditure - 100 gr/sq m; colour - colourless.

BAUMASTER - HYDROISOLIX 901:

• Function - water insulation parget for internal and external floors and walls, wet and basement closets, terraces, balconies, garages, pools, reservoirs, canals and others, not exposed to direct sunlight.

• Instructions for working - 20 kg dry mixture is mixed with 7-8 l water, when working with a brush or 5 to 5,6 l water, when ground coating with an adhesive trowel. Laying - before laying the finishing coating.

• Advantages - eliminates the possibility of leakages.

• Ingredients - cement, quartz sand, mineral aggregates, polymeric additives, water repellents.

• Packages - 20, 10, 5 kg in triply paper bag

• Technical parameters - norm of expenditure - 0,8-1,5 kg/sq m; colour - grey.

BAUMASTER - TILE ADHESIVE:

• Function - white polymer-cement elastic adhesive for fixing ceramic, porcelain, stone lining tiles on floors and walls, for interior and exterior use.

• Instructions for working - the dry mixture is mixed with water in proportion 3:1 using an electric mixer. The adhesive is layed with a long trowell, and well spread on the whole surface.

• Advantages - large period for working with (recommended for laying in bigger spaces)

• Ingredients - portland cement, quatz sand, mineral aggregates, polymeric additives.

• Packages - 25 kg in triply paper bag.

• Technical parameters - norm of expenditure - 4,5-5 kg/sq m;colour - white.

FUGA LUX - JOINTING MIXTURE:

• Function - cement jointing mixture for decorative framing of joints between ceramic tiles, porcelain and stone lining tiles on floors and walls, for exterior and interior use.

• Instructions for working - three parts dry jointing mixture are stirred with one part water for 3-4 minutes. The so obtained solution is diagonally layed with a rubber pallet. When the mixture becomes thicker, the joints are shaped with a foam sponge. The tiles are cleaned and the joints are glazed before complete hardening.

• Advantages - a wide range of colours - 32 colours

• Ingredients - portland cement, quartz sand, pigments, mineral aggregates, polymeric additives.

• Packages - 1 kg in cardboard box.

• Technical parameters - norm of expenditure - 0,1-0,5 kg/sq m; colour - choice from a catologue.